Air driven dispensing system
1. In the above case, a 3-way solenoid valve is used to improve oil draining, and oil draining can be improved by quickly removing the air in the MH type pump.
2. A. The spray cooling can be instantaneously turned ON / OFF by additionally using a two-way solenoid valve for both the air circuit and oil circuit from the MH type pump. Also, in this case, only the oil can be discharged from the spray nozzle by turning off the solenoid valve of the air circuit.
B. If you do not use the spray from the beginning, use a two-way cock valve instead of a solenoid valve in the air circuit or stop by plugging.
3. The end of Use example 2-A can be used as an air pump by using a distributor (control unit) instead of the spray nozzle.
| Part Number | Part Number | Oil Level Switch |
|---|---|---|
| MH-20D-A | 222138 | Without |
| MH-20D-A-L | 222195 | With |
| Input air pressure | 0.7MPa（Max） | ||
| Usually use air pressure | 0.1〜0.3MPa | ||
| Working Viscosity Range | 2〜100mm²/s | ||
| Reservoir Capacity | 2ℓ | ||
| Filter（Oil discharge side） | Filtration accuracy 40μ Replacement Filter Element / Part NumberFXE |
||
| Spray nozzle Available number | 1〜4本 | ||
| Reservoir Material | A5052TD-H34 | ||
| Weight | 3.3kg | ||
| OptionSpecifications | Oil level switch | Contact capacity | AC・DC200V 0.5A 30W |
| Contact Type | AContact （NO） | ||
| solenoid valve | Two-way/Three-way、 AC100V/200V DC24V |
||
● Packings may deteriorate depending on the fluid used.
Please be sure to contact our Global Center in advance.
● Please consult us when using quick-drying special oil.
Do not replenish the oil while pressurizing the tank. The filler cap may fly and cause serious injury.
